Terminal User Guide
Page 18
iWL250 User Guide
Copyright© 2019 Ingenico
SIM Card Installation
Mobile terminals require a SIM card in order to communicate. The SIM card will
be supplied already installed.
In order to access the SIM card you must first remove the SIM access cover by
unclipping the catches and lifting the cover as shown.
The SIM card should be inserted into the holder marked SIM. Take care to ensure
that the SIM card is inserted in the correct manner; the chip should be facing
downwards with the cut-out corner of the SIM card as shown.
DO NOT use any tools when installing or removing your SIM card.
To avoid damage to the SIM card holder, ensure that when
installing the SIM card you do not apply undue pressure or push
the SIM card beyond the natural limits of the SIM card holder.
Only use the SIM card supplied to you by your terminal supplier;
if your SIM card is lost, stolen, or damaged you should contact
the terminal Helpdesk immediately.
Cut-out corner
To Next Page
Loading...
