Terminal User Guide
Page 80
iWL250 User Guide
Copyright© 2019 Ingenico
First Config Menu Screen
PRINT EMV
Prints EMV data loaded on the
terminal. Do not use this feature
unless instructed to do so by the
terminal Helpdesk.
PRINT
CERTS
Prints Certificates loaded on the
terminal. Do not use this feature
unless instructed to do so by the
terminal Helpdesk.
PSTN
PREFIX
Allows the telephone network (PSTN)
prefix number to be set.
GSM N/W
TEST
Prints a rolling data sheet of the
mobile network. Do not use this
feature unless instructed to do so by
the terminal Helpdesk.
SEL GSM
N/W
Allow the selection of a different
mobile network. Do not use this
feature unless instructed to do so by
the terminal Helpdesk.
To access the Shortcut menu press the Menu key twice, then choose
SUPERVISOR and press green key you will be asked to type your current
supervisor password, and confirm this by pressing the green key. Press the Menu
key and choose SHORT CUT.
Below is a summary of the functions within the Shortcut menu, how to access them
and what they do.
Some Supervisor functions MUST only be used when instructed
to do so by the terminal Helpdesk.
Shortcut Menu Screen