Your Terminal Terminal User Guide
8
In order to use a telephone connection, connect one end of the UK
Telephone Cable to the telephone socket on your base unit (marked
MODEM / TEL IN); the other end should be plugged into an analogue
telephone line (BT) socket.
In order to use a LAN connection, connect one end of an Ethernet cable
into the Ethernet socket on your base unit; the other end should be
connected to a corresponding socket on your LAN/router.
Finally connect the UK Power Supply Unit into the power socket on your
base unit and to the mains power. Your terminal is charged by placing it,
securely, on to your base unit. Your base unit must be connected to the
power supply in order to charge your terminal.
Your terminal will automatically turn on when placed on your base
unit. To indicate that the terminal has power to it, the power icon
will be displayed on the screen.
To Next Page
Loading...
Need help?
General
