Ingenico iWL200 Series - Create a Wi-Fi Connection Profile

Terminal User Guide Your Terminal
19
Create a Wi-Fi Connection Profile
To create a new saved Wi-Fi connection profile select NEW PROFILE.
Connection Method:
1-Automatic Scan0000
2-Manual Connection
To scan for available Wi-Fi networks use
the up and down keys to select Automatic
Scan and press the enter key to begin.
Select Network:
Scanning...
Your terminal will scan for all available Wi-
Fi networks that are in range.
Select Network:
Network_1 0000
Network_2
...
All available Wi-Fi networks that are in
range will be displayed. Use the up and
down keys to select the required Wi-Fi
network name and press the enter key.
Security Type:
Home Security 0000
Enterprise Security
The security type associated with the
chosen Wi-Fi network will be automatically
selected; press the enter key to confirm this
selection.
Cypher:
None
WEP64
WEP128
WPA/WPA2 0000
The cypher associated with the chosen Wi-
Fi network will be automatically selected;
press the enter key to confirm this
selection.
Wi-Fi Password:
_
Enter the password associated with the
selected Wi-Fi network and press the enter
key to confirm.
Priority:
[low=0/high=20]
1_
If accepted, enter the priority weighting you
wish to associate to this Wi-Fi connection
profile and press the enter key.
You will receive a confirmation that the Wi-Fi connection profile has
been saved.