Ingenico iWL200 Series - Transaction Referrals and Contactless Issues; Screen Contrast Adjustment

Terminal User Guide Troubleshooting
85
To access the Shortcut menu press the menu key twice, then choose
SUPERVISOR by pressing the F3 key. You will be asked to type your
current supervisor password, and confirm this by pressing the enter key.
Press the menu key and choose SHORT CUT by pressing the F1 key.
 MENU, MENU, F3, [password], ENTER, MENU, F1
Below is a summary of the functions within the Shortcut menu, how to
access them and what they do.
Some Supervisor functions must only be used when instructed
to do so by the terminal Helpdesk.
Shortcut Menu Screen
CONTACTLESS
F1
Configures the internal/external Contactless Reader
support. Do not use this feature unless instructed to
do so by the terminal Helpdesk.
PINPAD
F2
Configures the external PINPad support. Do not use
this feature unless instructed to do so by the
terminal Helpdesk.
EPOS INTERF
F3
Configures the EPoS (till) Interface functionality. Do
not use this feature unless instructed to do so by the
terminal Helpdesk.
BLUETOOTH
F4
Allows the terminal to be associated to a Bluetooth
base. Do not use this feature unless instructed to do
so by the terminal Helpdesk.
Second Shortcut Menu Screen (press menu once)
WIFI SETUP
F1
Configures the Wi-Fi network. Do not use this
feature unless instructed to do so by the terminal
Helpdesk.