Inovance EtherCAT MD800 - Page 65

64
INOVANCE TECHNOLOGY EUROPE GmbH
MD800 EtherCAT Starting Guide_EN_v1.1_20211109.docx
corresponding
setting
the set value corresponding to the
minimum analog input.
F4-37
AI curve 2
maximum input
-10.00V~10.00V
The x axis corresponding to the
maximum input point of AI curve 2,
that is, the maximum analog input
voltage (or the maximum analog input
current).
F4-38
AI curve 2
maximum input
corresponding
setting
-100.0%~100.0%
The y-axis corresponding to the
maximum input point of AI curve 2 is
the set value corresponding to the
maximum analog input.
F4-39
AI curve 3
minimum input
-10.00V~10.00V
The x axis corresponding to the
minimum input point of AI curve 3 is
the minimum analog input voltage (or
minimum analog input current).
F4-40
AI curve 3
minimum input
corresponding
setting
-100.0%~100.0%
The y-axis corresponding to the
minimum input point of AI curve 3 is
the set value corresponding to the
minimum analog input.
F4-41
AI curve 3
maximum input
-10.00V~10.00V
The x axis corresponding to the
maximum input point of AI curve 3,
that is, the maximum analog input
voltage (or the maximum analog input
current).
F4-42
AI curve 3
maximum input
corresponding
setting
-100.0%~100.0%
The y-axis corresponding to the
maximum input point of AI curve 3 is
the set value corresponding to the
maximum analog input.
F4-48
AI curve selection
Ones place:
1: Curve 1 (2 points)
2: Curve 2 (2 points)
3: Curve 3 (2 points)
4: Curve 4 (4 points)
5: Curve 5 (4 points)
Ten:
1: Curve 1 (2 points)
2: Curve 2 (2 points)
3: Curve 3 (2 points)
4: Curve 4 (4 points)
5: Curve 5 (4 points)
hundreds:
1: Curve 1 (2 points)
2: Curve 2 (2 points)
3: Curve 3 (2 points)
4: Curve 4 (4 points)
5: Curve 5 (4 points)
Set the curve corresponding to
AI1~AI3 through the ones, tens, and
hundreds of this parameter, and each
AI can select any AI curve.
1: Curve 1 (2 points)
Two-point curve, the corresponding
relationship between voltage and
frequency is set by F4-31~F4-34.
2: Curve 2 (2 points)
Two-point curve, the corresponding
relationship between voltage and
frequency is set by F4-35~F4-38.
3: Curve 3 (2 points)
Two-point curve, the corresponding
relationship between voltage and
frequency is set by F4-39~F4-42.
4: Curve 4 (4 points)
4-point curve, the corresponding
relationship between voltage and
frequency is set by A6-00~A6-07.
5: Curve 5 (4 points)
4-point curve, the corresponding
relationship between voltage and
frequency is set by A6-08~A6-15.