Inovance IS 300 Series - Selection of IS300 Peripheral Electrical Parts

Product Information IS300 Series Servo Drive User Manual
- 12 -
Model
(Braking Resistor)
Recommended
Power
(Braking Resistor)
Recommended
Resistance
Braking
Unit
Remark
IS300-5T250-C-L 6.5 kW x2 ≥8 Ω x2 External MDBU-70-D x2
IS300-5T300-C-L 16 kW ≥2.5 Ω External MDBU-200-D
Note
• "x2" indicates that two braking units with respective braking resistor are connected in
parallel. "x3" has the same indication.
• The models in grey are customized servo drives (water cooling).
1.4 Selection of IS300 Peripheral Electrical Parts
Model
MCCB
(A)
Recommended
Contactor (A)
Recommended
Main Circuit
Cable at Input
Side (mm
2
)
Recommended
Main Circuit
Cable at Output
Side (mm
2
)
Recommended
Control Circuit
Cable (mm
2
)
Single-phase 220 V
IS300S002-C 16 10 2.5 2.5 1.0
IS300S003-C 16 10 2.5 2.5 1.0
IS300S004-C 20 16 4.0 2.5 1.0
IS300S005-C 32 20 6.0 4.0 1.0
Three-phase 220 V
IS300-2T002-C 10 10 2.5 2.5 1.0
IS300-2T003-C 16 10 2.5 2.5 1.0
IS300-2T004-C 16 10 2.5 2.5 1.0
IS300-2T005-C 25 16 4.0 4.0 1.0
IS300-2T010-C 32 25 4.0 4.0 1.0
IS300-2T020-C 63 40 4.0 4.0 1.0
IS300-2T030-C 63 40 6.0 6.0 1.0
IS300-2T040-C 100 63 10 10 1.5
IS300-2T050-C 125 100 16 10 1.5
IS300-2T070-C 160 100 16 16 1.5
IS300-2T080-C 200 125 25 25 1.5
IS300-2T100-C 200 125 35 25 1.5
IS300-2T140-C 250 160 50 35 1.5
IS300-2T170-C 250 160 70 35 1.5
IS300-2T210-C 350 350 120 120 1.5
IS300-2T300-C 500 400 185 185 1.5
IS300-2T140-C-L 250 160 50 35 1.5
IS300-2T170-C-L 250 160 70 35 1.5