Inovance IS 300 Series - 4.1.2 Digital Display; 4.1.3 Description of Keys on the Operation Panel

IS300 Series Servo Drive User Manual Operation and Display
- 37 -
LOCAL/REMOT: OFF Operation panel
LOCAL/REMOT: ON Terminals
LOCAL/REMOT: ashing Communication
• FWD/REV:
OFF indicates forward rotation, and ON indicates reverse rotation.
• TUNE/TC:
ON indicates the torque control mode, OFF indicates the speed control mode and
ashing indicates the tuning status.
•
Hz A V
RPM %
Unit Indicators(● Indicates ON, ○ Indicates OFF)
Hz: unit of frequency
A: unit of current
V: unit of voltage
RPM: unit of rotational speed
% : percentage
4.1.2 Digital Display
The 5-digit LED display is able to display the set frequency, output frequency, monitoring
data and error codes.
4.1.3 Description of Keys on the Operation Panel
Key Name Function
PRG Programming key Enter or exit level I menu.
ENTER Confirm key
Enter the menu interfaces level by level, and confirm the
parameter setting.
Increase key Increase data or function code.
Decrease key Decrease data or function code.
Shift key
Select the displayed parameters in turn on the stop display
interface and running display interface, and select the
modification digit of parameters when modifying parameters.
RUN Run key
Press this key to start the servo drive in the operation panel
control mode.