Inovance IS 300 Series - 4.1.1 Description of Indicators

Operation and Display IS300 Series Servo Drive User Manual
- 36 -
Chapter 4 Operation and Display
4.1 Operation Panel
You can modify the servo drive's parameters, monitor the servo drive's working status and
run/stop the servo drive via the operation panel shown as below:
Operation mode indicator
ON: Local control
OFF: Remote control
Forward/Reverse
rotation indicator
ON: Reverse rotation
OFF: Forward rotation
RUN indicator
Digital display
Programming key
Menu key
Run key
Multi-function key
Stop/Reset key
Shift key
△ Up key
▽Down key
Confirm key
Unit indicator
Tune/Fault indicator
4.1.1 Description of Indicators
• RUN
OFF indicates that the servo drive is in the stop status, and ON indicates that the servo
drive is in the running status.
• LOCAL/REMOT:
It indicates whether the servo drive is operated via operation panel, terminals or
communication.