Product Information IS300 Series Servo Drive User Manual
- 6 -
Chapter 1 Product Information
1.1 IS300 Servo Drive Designation Rules
IS300 T
030
C L
Servo drive series
Voltage class
S
2T
T
5T
Single-phase 220 V
Three -phase 220 V
Three -phase 380 V
Three -phase 480 V
Cooling method
Null
L
Forced air cooling by default
Water cooling
Rated output current
(approximate value )
Interface board type
C
With CAN communication
and motor overheat
protection PTC sensor
Note that the servo drive with the resolver
PG card is standard configuration.
1.2 IS300 Models and Technical Data
Model
Power Capacity
(kVA)
Input Current
(A)
Output Current
(A)
Adapted Motor (S1)
kW HP
Single-phase 220 V, 50/60 Hz
IS300S002-C 1 5.4 2.3 0.4 0.5
IS300S003-C 1.5 8.2 4 0.75 1
IS300S004-C 3 14 7 1.5 2
IS300S005-C 4 23 9.6 2.2 3
Three-phase 220 V, 50/60 Hz
IS300-2T002-C 1.5 3.4 2.1 0.4 0.5
IS300-2T003-C 3 5 3.8 0.75 1
IS300-2T004-C 4 5.8 5.1 1.5 2
IS300-2T005-C 5.9 10.5 9 2.2 3
IS300-2T010-C 8.9 14.6 13 3.7 5
IS300-2T020-C 17 26 25 5.5 7.5
IS300-2T030-C 21 35 32 7.5 10
IS300-2T040-C 30 46.5 45 11 15
To Next Page
Loading...