Inovance IS 300 Series User Manual

Wiring IS300 Series Servo Drive User Manual
- 26 -
Type Terminal Name Description
Analog output
AO1-GND Analog output 1
Voltage or current output is decided by J4
jumper.
Output voltage range: 0–10 V/0–20 mA
12-bit resolution, correction accuracy 1%,
maximum-load resistance value ≤500 Ω
AO2-GND Analog output 2
Voltage or current output is decided by J6
jumper.
Output voltage range: 0–10 V/0–20 mA
12-bit resolution, correction accuracy 1%,
maximum-load resistance value ≤500 Ω
Relay
output
T/A1-T/B1 NC terminal
Contact driving capacity:
250 Vac, 3 A, COSφ=0.4; 30 Vdc, 1 A
T/A1-T/A
3-T/C1-T/C3
NO terminal
Auxiliary
interface
CNR1
Operation panel
interface
Connecting to operation panel or copy unit
2.4 Description of Jumpers of IS300
Jumper
Jumper
Position
Description
Jumper
Position
Description
J2
GND terminal connecting to
earth capacitance (adopted
when the servo drive is well tied
to ground.)
GND terminal not connecting
to earth capacitance (adopted
when the servo drive is poorly
tied to ground.)
J3
COM terminal connecting to
earth capacitance (adopted
when the servo drive is well tied
to ground.)
COM terminal not connecting
to earth capacitance (adopted
when the servo drive is poorly
tied to ground.)
J4 AO1 output voltage (0–10 VDC) AO1 output current (0–20 mA)
J5 AI3 input voltage (-10–10 VDC) AI3 input current (0–20 mA)
J6 AO2 output voltage (0–10 VDC) AO2 output current (0–20 mA)
J7 Internal power driving DI1-DI5 External power driving DI1–DI5
J8
CAN COM connecting to
terminal resistor (adopted
by terminal for multi-drive
communication)
CAN COM not connecting to
terminal resistor (adopted by
middle machine for multi-drive
communication)
J9
485 COM connecting to terminal
resistor (adopted by terminal for
multi-drive communication)
485 COM not connecting to
terminal resistor (adopted by
middle machine for multi-drive
communication)

Inovance IS 300 Series Specifications

General

Brand	Inovance
Model	IS 300 Series
Category	Servo Drives
Language	English