Need help?Do you have a question about the Inovance IS 300 Series and is the answer not in the manual?
General| Series | IS300 Series |
|---|---|
| Enclosure Rating | IP20 |
| Control Mode | Torque, Speed, Position |
| Communication | CANopen, Modbus, EtherCAT |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit |
| Operating Temperature | 0°C to 55°C |
| Humidity | 5% to 95% (non-condensing) |
| Vibration Resistance | 5.9 m/s² (10 to 150 Hz) |
| Cooling Method | Forced air cooling (fan) |
| Storage Temperature | -20°C to 65°C |
Rules for naming IS300 servo drives, including series, voltage, and current.
Table listing IS300 servo drive models with power, current, and motor capacity.
Guide for selecting appropriate braking resistors and units for IS300 drives.
Recommendations for MCCB, contactors, and cables for IS300 drives.
Detailed physical and mounting dimensions for IS300 servo drives.
Physical dimensions and mounting details for IS300 forced air-cooled models.
Physical dimensions and mounting details for IS300 water-cooled models.
Specific dimensions for mounting the operation panel of IS300 drives.
Dimensions and mounting information for external DC reactors used with IS300.
Physical dimensions and mounting for external braking units (MDBU) used with IS300.
General guidance on wiring methods for the IS300 servo drive.
Explanation of the terminals for the main power and output circuits.
Details on control circuit terminals for I/O, communication, and power supply.
Explanation of the function and settings of internal jumpers on the IS300.
Details of terminals on the PG card for encoder feedback.
Diagrams and instructions for wiring external braking units.
Visual flowchart detailing the steps for commissioning servo pump applications.
Procedure for performing a trial run of the motor, including parameter setup and tuning.
Steps for conducting a trail run of the servo pump application.
Overview of the IS300 servo drive's operation panel and its components.
Explanations for the various indicator lights on the operation panel.
Information about the 5-digit LED display and its functions.
Detailed functions of each key on the servo drive's operation panel.
Guide on navigating and changing parameters using the operation panel.
Instructions on using the QUICK key for shortcut menu access and parameter management.
How to display and monitor various operating status parameters.
Procedure for setting and managing user password protection for the drive.
Steps for performing motor tuning to optimize performance and control.
Comprehensive guide to identifying and resolving error codes and faults.
Table of common faults, their causes, and recommended solutions for quick analysis.
Explanation of the naming convention for ISMG servo motors.
Technical specifications for ISMG1 and ISMG2 servo motors.
Specifics for ISMG2 forced air-cooled motors with 266x266 base.
Specifics for ISMG1 natural cooling motors with 200x200 base.
Mechanical drawings showing dimensions and mounting for ISMG motors.
Wiring diagrams and terminal definitions for ISMG servo motors.
A comprehensive list of all function codes and their settings for the IS300 drive.
A cross-reference table mapping servo motor models to their corresponding motor codes (FP-02).
Example configurations showing servo motor and drive pairings for pump systems.
To Next Page