Inovance IS 300 Series - Appendix 2 Servo Motor Code Table

IS300 Series Servo Drive User Manual Appendix
- 93 -
Function
Code
Name Setting Range Min. Unit Default Property
FC-54
Multi-point AI2
inexion point 7
input frequency
-100.0–100.0% 0.1% 70.0% ☆
FC-55
Multi-point AI2
inexion point 8
input
-11.00–11.00 V 0.01 V 8.00 V ☆
FC-56
Multi-point AI2
inexion point 8
input frequency
-100.0%–100.0% 0.1% 80.0% ☆
FC-57
Multi-point AI2
inexion point 9
input
-11.00–11.00 V 0.01 V 9.00 V ☆
FC-58
Multi-point AI2
inexion point 9
input frequency
-100.0%–100.0% 0.1% 90.0% ☆
FC-59
Multi-point AI2
inexion point 10
input
-11.00–11.00 V 0.01 V 10.00 V ☆
FC-60
Multi-point AI2
inexion point 10
input frequency
-100.0%–100.0% 0.1% 100.0% ☆
Group FD Serial Port Communication Parameters
FD-00 Baud rate
0: 300 bps
1: 600 bps
2: 1200 bps
3: 2400 bps
4: 4800 bps
5: 9600 bps
6: 19200 bps
7: 38400 bps
1 5 ☆
FD-01 Data format ☆
FD-02 Local address ☆
FD-03 Response delay ☆
FD-04 Time-out time ☆
FD-05
Communication
Protocol
0: Standard Modbus
protocol
1: Background oscillometer
protocol
1 1 ☆
Note
The LED display of reserved parameters is "-".