Inovance MD500T75G - Page 234

8. Interfaces and Communication MD500 User Manual
- 234 -
Command Address Command Content
2001H BIT0: DO1 control
BIT1: DO2 control
BIT2: RELAY1 control
BIT3: RELAY2 control
BIT4: FMR control
BIT5: VDO1
BIT6: VDO2
BIT7: VDO3
BIT8: VDO4
%,79'2
AO1 control (write-only)
Command Address Command Content
2002H 0 to 7FFF indicates 0% to 100%.
AO2 control (write-only)
Command Address Command Content
2003H 0 to 7FFF indicates 0% to 100%.
Pulse output control (write-only)
Command Address Command Content
2004H 0 to 7FFF indicates 0% to 100%.
efesotomasyon.com