Insignia NS-32E740A12 User Manual

14
NS-32E740A12 Insignia 32" LED-LCD HDTV, 720p
www.insigniaproducts.com
Using DVI (same as HDMI but requires a sound
connection)
To connect a DVD or Blu-ray player using DVI:
1 Make sure that your TV’s power cord is
unplugged and the DVD or Blu-ray player is
turned off.
2 Connect an HDMI-DVI adapter (not included) to
one end of an HDMI cable (not included).
3 Connect the HDMI-DVI adapter to the HDMI 1
jack on the back of your TV and to the DVI OUT
jack on the DVD or Blu-ray player.
4 Connect a 3.5 mm audio cable (not included) to
the PC/DVI AUDIO IN jack on the back of your
TV and to the AUDIO OUT jack on the DVD or
Blu-ray player.
5 Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the DVD or Blu-ray
player.
6 Press INPUT to open the Input Source list.
7 Press
 or  to select HDMI 1, then press
ENTER.
Using component video (better)
To connect a DVD or Blu-ray player using
component video:
1 Make sure that your TV’s power cord is
unplugged and the DVD or Blu-ray player is
turned off.
2 Connect a component video cable (provided) to
the Y/P
B/PR (component video) jacks on the
side of your TV and to the COMPONENT OUT
jacks on the component video device.
3 Connect an audio cable to the L/R (audio in)
jacks on the side of your TV and to the L/R
AUDIO OUT jacks on the component video
device.
4 Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the DVD or Blu-ray
player.
5 Press INPUT to open the Input Source list.
6 Press
 or  to select Component/AV, then
press ENTER.
Note
A DVI device must be connected to the HDMI 1 jack.
If you connect a DVI device to another HDMI jack,
you will not hear audio.
Note
When you connect the audio using the PC/DVI
AUDIO IN jacks, the audio output is analog.
If your TV has a digital audio jack (optical or coaxial),
you can connect the video to the component video
jacks and connect the audio to the digital audio jack
to get digital audio output.
Note
You can also press HDMI repeatedly to select the
HDMI 1.
DVD or Blu-ray player
Back of TV
HDMI cable with HDMI-DVI adapter
3.5 mm audio cable
Notes
The Y-VIDEO/PB/PR (component video) jacks share
the audio jacks with the Y-VIDEO (composite video)
jack.
When you connect the audio using the L and R audio
jacks, the audio output is analog.
You can connect the video to the component video
jacks and connect the audio to the digital audio jack
to get digital audio output.
Note
You can also press COMP to select the component
DVD or Blu-ray player.
USB
USB
USB
S
Component video cable
Audio cable
Cables are often color-coded to
match color-coded jacks.
DVD or Blu-ray player
Side of TV

Insignia NS-32E740A12 Specifications

General

Response time	9 ms
Display diagonal	31 \
Display brightness	350 cd/m²
Display resolution	1366 x 768 pixels
Native aspect ratio	16:9
Supported video modes	1080p
Contrast ratio (dynamic)	5000:1
Contrast ratio (typical)	1200:1
Supported graphics resolutions	1366 x 768
3D	No
Backlight	-
HDMI ports quantity	3
DVI-D ports quantity	1
DVI-I ports quantity	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	0
Product color	Black
Panel mounting interface	200 x 100 mm
RMS rated power	- W
Power consumption (standby)	1 W
Power consumption (typical)	64 W
Remote control type	Standard

Weight and Dimensions

Height (with stand)	533.4000 mm
Weight (with stand)	9888.3137 g
Depth (without stand)	203.2000 mm
Width (without stand)	736.6000 mm
Height (without stand)	457.2000 mm
Weight (without stand)	8164.6627 g