44
NS-32E740A12 Insignia 32" LED-LCD HDTV, 720p
www.insigniaproducts.com
3 Press ENTER. The USB-Photos menu opens.
4 Press
or to highlight Settings, then press
ENTER. The USB-Photo-Settings menu opens.
5 Press
or to highlight an option, then press
ENTER. You can select:
• Repeat—Repeats the slideshow when it
reaches the end. You can select On or Off.
• Shuffle—Displays the slideshow photo in
random order. You can select On or Off.
• Speed—Sets the amount of time a photo is
displayed before the slideshow moves to the
next photo. You can select 4 Sec, 6 Sec, or 8
Sec.
• Transition—Selects the way photos transition
when moving to the next file in the slideshow.
You can select:
• None—No transition effect.
• Fade to Black—Fades the screen to black
between photos.
• Vertical Wipe—Wipes the screen from top
to bottom between photos.
• Horizontal Wipe—Wipes the screen from
left to right between photos.
• Random—Randomly selects a transition
effect.
6 Press EXIT to close the menu.
Maintaining
• Do not use your TV in areas that are too hot or too
cold, because the cabinet may warp or the screen
may malfunction. Your TV works best in
temperatures that are comfortable to you.
• Storage temperatures are 32° to 122°F (0° to 50°C).
• Working temperatures are 41° to 104°F
(5° to 40°C).
• Do not place your TV in direct sunlight or near a
heat source.
Cleaning the TV cabinet
Clean the cabinet with a soft, lint-free cloth. If the
cabinet is especially dirty, moisten a soft, lint-free
cloth in a weak detergent solution, squeeze the
excess moisture from the cloth, then wipe the
screen or cabinet with the cloth. Use a clean cloth to
dry the screen or cabinet.
Cleaning the TV screen
Clean the screen with a soft, lint-free cloth.
Troubleshooting
Video and audio
OK
ENTER
MENU
EXIT
Browse Photos
Favorite Photos
View Slideshow
Settings
MOVE
EXIT
PREVIOUS
SELECT
Change slideshow settings
USB • Photos
Picture Channels Settings USBAudio
OK
ENTER
MENU
EXIT
USB • Photo • Settings
Repeat
Shuffle
Speed
Transition
MOVE
EXIT
PREVIOUS
SELECT
On
Off
4 sec
None
Repeat the slideshow when it reaches the end
Picture Channels Settings USBAudio
Warning
Do not try to repair your TV yourself. Contact
authorized service personnel.
Problem Solution
Picture does not fill the
screen. There are black bars
around the picture.
• Change the aspect ratio. An increasing amount
of digital TV and movies are presented in wide
screen (16:9). See “Adjusting the TV picture” on
page 23.
No picture (screen is not lit)
and no sound.
• Press on the TV or the remote control.
•Make sure that Audio Only option is set to Off.
See “Playing TV audio only” on page 26.
• Make sure that the video cables are connected
securely to your TV.
• Adjust the contrast and brightness. See
“Adjusting the TV picture” on page 23.
• Make sure that the power cord is plugged in.
• Make sure that the correct video input source is
selected. See “Selecting the video input source”
on page 21.
• Try another channel. The station may be
experiencing problems.
• Make sure that the incoming signal is
compatible.
• Make sure the antenna or cable TV is connected
correctly and securely. See “Connecting a cable
or satellite box” on page 10 or “Connecting an
antenna or cable TV (no box)” on page 13.
• Check the closed caption settings. Some TEXT
modes can block the screen.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
