EasyManuals Logo

Insignia NS-32E740A12 User Manual

Insignia NS-32E740A12
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
45
Insignia 32" LED-LCD HDTV, 720p
www.insigniaproducts.com
Dark, poor, or no picture
(screen is lit), but sound is
good.
Try another channel. The station may be
experiencing problems.
Make sure that the antenna or cable TV is
connected correctly and securely. See
“Connecting a cable or satellite box” on page 10
or “Connecting an antenna or cable TV (no box)”
on page 13.
Adjust the brightness. See “Adjusting the TV
picture” on page 23.
Make sure that the correct picture mode is
selected. See “Adjusting the TV picture” on
page 23.
If you are using an antenna, the digital channel
signal may be low. To check the digital channel
signal strength, see “Checking the digital signal
strength” on page 29.
If you are using an antenna and the signal
strength is low, adjust the antenna or use a
highly directional outdoor antenna or set-top
antenna with a built-in amplifier.
Make sure that the video cables are connected
securely to your TV.
The video cable(s) you are using may be bad. Try
a new set.
Try another channel. The station may be
experiencing problems.
No color, dark picture, or
color is not correct.
Try another channel. The station may be
experiencing problems.
Adjust the color settings. See “Adjusting the TV
picture” on page 23.
Make sure that the video cables are connected
correctly and securely to your TV.
Make sure that the antenna or cable TV is
connected correctly and securely. See
“Connecting a cable or satellite box” on page 10
or “Connecting an antenna or cable TV (no box)”
on page 13.
If you are using an antenna, the digital channel
signal may be low. To check the digital channel
signal strength, see “Checking the digital signal
strength” on page 29.
If you are using an antenna and the signal
strength is low, adjust the antenna or use a
highly directional outdoor antenna or set-top
antenna with a built-in amplifier.
Only snow (noise) appears
on the screen.
Try another channel. The station may be
experiencing problems.
Make sure that the antenna or cable TV is
connected correctly and securely. See
“Connecting a cable or satellite box” on page 10
or “Connecting an antenna or cable TV (no box)”
on page 13.
If you are using an antenna, the digital channel
signal may be low. To check the digital channel
signal strength, see “Checking the digital signal
strength” on page 29.
If you are using an antenna and the signal
strength is low, adjust the antenna or use a
highly directional outdoor antenna or set-top
antenna with a built-in amplifier.
Problem Solution
Dotted lines or stripes
appear on the screen.
Make sure that the antenna or cable TV is
connected correctly and securely. See
“Connecting a cable or satellite box” on page 10
or “Connecting an antenna or cable TV (no box)”
on page 13.
If you are using an antenna, the digital channel
signal may be low. To check the digital channel
signal strength, see “Checking the digital signal
strength” on page 29.
If you are using an antenna and the signal
strength is low, adjust the antenna or use a
highly directional outdoor antenna or set-top
antenna with a built-in amplifier.
Make sure that the video cables are connected
securely to your TV.
The video cable(s) you are using may be bad. Try
a new set.
Other devices (for example, surround sound
receiver, external speakers, fans, or hair dryers)
may be interfering with your TV. Try turning off
one device at a time to determine which device
is causing interference. Once you have
determined which device is causing
interference, move it further from the TV to
eliminate the interference.
Double images.
Use a highly directional outdoor antenna, cable
TV, or satellite TV.
The picture has a few bright
or dark spots.
A few bright or dark spots on an LCD screen is
normal. It does not affect the operation of this
TV.
Good picture, but no sound.
• Increase the volume.
Make sure that the sound is not muted.
Disconnect the headphones.
Make sure that the correct audio mode is
selected.
Make sure that the audio cables are connected
correctly and securely to your TV.
Make sure that the antenna or cable TV is
connected correctly and securely. See
“Connecting a cable or satellite box” on page 10
or “Connecting an antenna or cable TV (no box)”
on page 13.
If you are using an antenna, the digital channel
signal may be low. To check the digital channel
signal strength, see “Checking the digital signal
strength” on page 29.
The audio cable(s) you are using may be bad. Try
a new set.
Poor picture
Make sure that the room is not too bright. Light
reflecting off the screen can make the picture
difficult to see.
If an S-VHS camera or a camcorder is connected
while another connected device is turned on,
the picture may be poor. Turn off one or more
devices.
Good sound but poor color
Adjust the contrast, color, and brightness
settings.
Audio noise
Other devices (for example, surround sound
receiver, external speakers, fans, or hair dryers)
may be interfering with your TV. Try turning off
one device at a time to determine which device
is causing interference. Once you have
determined which device is causing
interference, move it further from the TV to
eliminate the interference.
Problem Solution

Table of Contents

Other manuals for Insignia NS-32E740A12

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Insignia NS-32E740A12 and is the answer not in the manual?

Insignia NS-32E740A12 Specifications

General IconGeneral
Response time9 ms
Display diagonal31 \
Display brightness350 cd/m²
Display resolution1366 x 768 pixels
Native aspect ratio16:9
Supported video modes1080p
Contrast ratio (dynamic)5000:1
Contrast ratio (typical)1200:1
Supported graphics resolutions1366 x 768
3DNo
Backlight-
HDMI ports quantity3
DVI-D ports quantity1
DVI-I ports quantity2
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity0
Product colorBlack
Panel mounting interface200 x 100 mm
RMS rated power- W
Power consumption (standby)1 W
Power consumption (typical)64 W
Remote control typeStandard
Weight and Dimensions IconWeight and Dimensions
Height (with stand)533.4000 mm
Weight (with stand)9888.3137 g
Depth (without stand)203.2000 mm
Width (without stand)736.6000 mm
Height (without stand)457.2000 mm
Weight (without stand)8164.6627 g

Related product manuals