Insignia NS-32E740A12 User Manual

24
NS-32E740A12 Insignia 32" LED-LCD HDTV, 720p
www.insigniaproducts.com
• Aspect Ratio—Selects the aspect ratio of
the picture.
• Overscan—Adjusts the picture’s
reproduction rate. You can select On or
Off.
• Color Temperature—Selects the color
temperature. You can select Cool (to
enhance the blues), Normal, or Warm (to
enhance the reds).
• Noise Reduction—Selects the noise
reduction mode to reduce picture noise
(snow). You can select Low, Middle, High,
or Off.
• Backlight—Sets the overall brilliance of
the screen.
• Advanced Contrast—Selects from:
• Adaptive Contrast—Automatically
adjusts picture detail and brightness.
You can select On or Off.
• Dynamic Contrast Ratio—Enhances
the contrast ratio between light and
dark areas of the picture. You can select
On or Off.
• Reset Picture Settings—Resets all picture
settings to factory mode.
4 Press
 or  to adjust the option, or press  or
 to select a setting.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Adjusting the computer image
To adjust the computer image:
1 Make sure that your TV is in VGA mode. For
more information, see “Selecting the video
input source” on page 21.
2 Press MENU. The on-screen menu opens.
3 Press
 or  to highlight SETTINGS, then press
 or ENTER. The SETTINGS menu opens.
Aspect ratio option Example
Normal:
Displays the original
aspect ratio with vertical
black bars on the left
and right of the image.
Zoom:
Expands the image to fill
the screen. The top and
bottom of the image
may be cropped.
Wide:
Use this option to view
content recorded in a
16:9 (wide-screen)
aspect ratio.
Cinema:
Stretches the image at
the edges, but keeps a
clear image in the
center.
Auto:
Automatically adjusts
the image based on the
screen size and the TV
program.
Note: Auto is only
available when Auto
Zoom in the CHANNELS
menu is set to On.
Note
You can also press ZOOM to select the aspect ratio.
OK
ENTER
MENU
EXIT
Picture • Advanced Video
Aspect Ratio
Overscan
Color Temperature
Noise Reduction
Backlight
Advanced Contrast
Wide
On
Cool
Middle
43
Automatically adjust picture detail and brightness
MOVE
EXIT
PREVIOUS
SELECT
Adaptive Contrast
Dynamic Contrast Ratio ON
ON OFF
OFF
Picture Channels Settings USBAudio
OK
ENTER
MENU
EXIT
Picture
Mode
Brightness
Contrast
Color
Tint
Sharpness
Energy Savings
48
50
60
0
+10
MOVE
EXIT
PREVIOUS
SELECT
Adjust settings to affect picture quality
Picture Channels Settings USBAudio
OK
ENTER
MENU
EXIT
Settings
MOVE
EXIT
PREVIOUS
SELECT
System Info
Reset to Default
Input Labels
INlink
Computer Settings
Component Settings
Set options for when a computer is connected to the TV
Picture Channels
Settings USBAudio

Insignia NS-32E740A12 Specifications

General

Response time	9 ms
Display diagonal	31 \
Display brightness	350 cd/m²
Display resolution	1366 x 768 pixels
Native aspect ratio	16:9
Supported video modes	1080p
Contrast ratio (dynamic)	5000:1
Contrast ratio (typical)	1200:1
Supported graphics resolutions	1366 x 768
3D	No
Backlight	-
HDMI ports quantity	3
DVI-D ports quantity	1
DVI-I ports quantity	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	0
Product color	Black
Panel mounting interface	200 x 100 mm
RMS rated power	- W
Power consumption (standby)	1 W
Power consumption (typical)	64 W
Remote control type	Standard

Weight and Dimensions

Height (with stand)	533.4000 mm
Weight (with stand)	9888.3137 g
Depth (without stand)	203.2000 mm
Width (without stand)	736.6000 mm
Height (without stand)	457.2000 mm
Weight (without stand)	8164.6627 g