Insignia NS-42E859A11

Other manuals for Insignia NS-42E859A11

Questions and Answers:

S
slucasAug 26, 2025
Why is there good picture but no sound on my Insignia LED TV?
- D
  Dean WilliamsAug 27, 2025
  If your Insignia LED TV has a good picture but no sound, try these solutions: * Increase the volume. * Make sure that the sound is not muted. * Ensure the correct audio mode is selected. * Check that the audio cables are connected correctly and securely to the back of your TV. * Verify the antenna or cable TV is connected correctly and securely. * If you are using an antenna, the digital channel signal may be low. * The audio cable(s) you are using may be bad. Try a new set.
W
William ButlerAug 25, 2025
How to fix Insignia NS-42E859A11 when there is no power?
- J
  Jose FullerAug 26, 2025
  If your Insignia LED TV has no power, take these steps: * Ensure the power cord is correctly connected to the power outlet. * Unplug the power cord, wait 60 seconds, then plug it back in and turn on the TV. * Other devices may be interfering with your TV. Try turning off one device at a time to determine which device is causing interference. Once you have determined which device is causing interference, move it further from the TV to eliminate the interference.
D
Dylan YatesAug 25, 2025
Why is my Insignia NS-42E859A11 LED TV showing no picture?
- J
  Jonathan PattonAug 25, 2025
  If your Insignia LED TV displays no picture, try the following: * Press on the TV or remote control. * Ensure the power cord is plugged in. * Try another channel to rule out station issues. * Check that video cables are securely connected to the back of the TV. * Adjust the contrast and brightness settings. * Select the correct video source. * Confirm the incoming signal is compatible. * Verify the antenna or cable TV is properly connected. * Check the closed caption settings, as some TEXT modes can block the screen.

Insignia NS-42E859A11 Specifications

General

Display diagonal	42 \
Display brightness	450 cd/m²
Supported video modes	1080p
Contrast ratio (dynamic)	12000:1
Screen format adjustments	16:9
Supported graphics resolutions	1920 x 1080 (HD 1080)
3D	No
Backlight	-
Headphone connectivity	3.5 mm
HDMI ports quantity	4
DVI-D ports quantity	1
DVI-I ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Compatible memory cards	Not supported
Product color	Black
Panel mounting interface	200 x 200 mm
RMS rated power	- W
Number of speakers	3
Power consumption (standby)	1 W
Power consumption (typical)	115 W
Remote control type	Standard

Weight and Dimensions

Depth (with stand)	279.4000 mm
Weight (with stand)	17780.8209 g
Depth (without stand)	50.8000 mm
Width (without stand)	990.6000 mm
Height (without stand)	609.6000 mm
Weight (without stand)	14605.6743 g