3-5
Create a sample in Bluehill
Product Support: www.instron.com
Select a test method file
1. Click Browse… to open a standard Open File dialog box.
2. Find the method file and click Open.
When you open the selected method file, the software advances to the next step in which
you name the new sample.
Select from the Most Recently Used list
1. Click on the name in the Most recently used list. The file name and its location
appear in the associated fields and a preview of the file displays in the Preview
window.
2. Click Next to open the file.
The software advances to the next step in which you name the new sample.
Name the new sample
The second step in creating a new sample is to name the sample and identify where to save
the sample file.
To name a sample file:
1. In the Sample name field, enter a name for the sample file or accept the name
generated by the system.
The system produces a suggested name for the sample file, based on the most recently
used sample file name. If there are no sample files created, the system uses
“TestSample” as the default name. The system appends a number to the file name to
ensure a unique name.
If the file does not open, the system displays an open file error message. Refer to the online
help for further assistance.
Double-click a file name in the list to open it.
If the test method has the Automatically name the sample feature enabled, the system
automatically names the sample according to the default name and the default location
identified in the test method. The system appends a number to the sample name every time
this method is used for a new sample. The system skips the second step and advances
directly to the test workspace on the Test tab.
To Next Page
Loading...
Need help?
General
