English - Original
EC Declaration of conformity for machinery
(Machinery Directive 2006/42/EC, Annex II., sub. A)
Manufacturer: Instron, a division of Illinois Tool Works
Address: 825 University Ave., Norwood, MA, 02062, USA
Name and address of the person authorised to compile the technical file:
Name: Jim Rose
Address: Instron – Division of ITW Limited, Coronation Road, High Wycombe,
Buckinghamshire, HP12 3SY, United Kingdom.
Herewith declares that testing machines series T2020, 3300, 5500, 5500A, 5800, 5900
and in particular the machine identified as
Model/ Description :
Serial Number:
x
is in conformity with the relevant provisions of the
Machinery Directive (2006/42/EC)
x is in conformity with the provisions of the following other EC-Directives
EMC-Directive 2004/108/EC
And furthermore, we declare that
x the applicable parts/clauses of the following European harmonised standards published in
the Official Journal have been used
BS EN ISO 12100 (2010) Safety of Machinery. General principles for design.
Risk assessment and risk reduction.
BS EN 61326-1 (2006) Electrical Equipment for measurement, control and
laboratory use - EMC requirements.
BS EN 61010-1 (2001) Safety Requirements for Electrical Equipment for
Measurement Control and Laboratory Use.
Place and date of origin Signature:
Norwood, MA., USA
To Next Page
Loading...
