Introduction
12 / 56
3-140-UM-EN-02
Standards
EN 61326-1
EN 62479
EN 300 220-2:V3.1.1
EN 300 330:V2.1.1
EN 300 328:V2.1.1
Specific
PTB K7.2, Ordonnance of FDJP 941.231 (CH), Welmec 7.2, OIML D11
1.1.5 Declaration of conformity
The declaration of conformity is available by scan-
ning the QR-Code.
1.2 About the instructions
1.2.1 Purpose of this instruction
This instruction is part of the product. Keep the instruction handy so that it is always accessible at all times.
This instruction is intended to ensure that the product is used safely and for the intended purpose. The op-
erator must ensure that the operating personnel have read and understood the instructions. The operator
must ensure that the operating instructions of the associated products are also read and understood.
1.2.2 Structure of overall documentation
The following documents complete the documentation of this product:
l User manual (this document). Available for download on https://integra-metering.com/downloads
l Installation guide. Included in the product delivery.
l Technical data sheet. Available for download on https://integra-metering.com/downloads
1.2.3 Layout conventions
Symbols and text markups
This document contains various symbols and text markups.
Symbol Name Function
l Enumeration The grey dot marks a non-numbered list.
u Action
The grey triangle marks actions that must be per-
formed in the corresponding order.
u
w
Reaction
The white triangle marks the reaction to an action.
(1) Item numbers
The numbers inside the brackets refer to the items
in an image.
Legal notice [}p.2]
Cross-reference
Cross-references are used to refer to a chapter
within the document. They are linked and are acces-
sible from the PDF by a mouse click.
Tips are used to support the reader in handling the product.
To Next Page
Loading...
Need help?
General
