Operation
42 / 56
3-140-UM-EN-02
Display Meaning Visible Editable
dT Temperature difference According to calculator function No
P1 Performance According to calculator function No
Qv1 Flow According to calculator function No
Qm1 Mass flow According to calculator function No
KF Specific heat factor According to calculator function No
DEN Density According to calculator function No
P2 Performance 2 According to calculator function No
Qv2 Flow 2 According to calculator function No
Qm2 Mass flow 2 According to calculator function No
6.6.5 Time
Display Meaning Visible Editable
DAT Date Yes Service mode
TIM Time Yes Service mode
DAY Day Yes No
SEA
Winter /summer time activa-
tion (off / auto)
Yes Service mode
SEA Winter / summer time Yes Service mode
HR Operating hours Yes Programming mode
AL Hours of alarm Yes Programming mode
Err Hours of error Yes Programming mode
Pb Calibration year
Field is only visible if device is cali-
brated.
No
Marke
Information about the cali-
bration company
Field is only visible if device is cali-
brated.
No
6.6.6 Stich
Display Meaning Visible Editable
Nr Billing date number 1- 12 Yes Yes for selection
St Billing date 1- 12 Yes Service mode
DAT Saving date Yes No
E1 Energy meter reading According to calculator function No
V1 Volume meter reading According to calculator function No
M1 Mass meter reading According to calculator function No
E2
Energy meter reading 2 in op-
tions BDE / BDV
According to calculator function No
V2
Volume meter reading 2 in
options BDE / BDV
According to calculator function No
M2
Mass meter reading 2 in op-
tions BDE / BDV
According to calculator function No
E3
Energy meter reading 3 in op-
tion TGR
According to calculator function No
H1
Auxiliary meters reading 1 in
option Flow
According to calculator function No
H2 Auxiliary meters reading 2 According to calculator function No
Hr Hours Yes No
AL Alarm hours Yes No
Err Error hours Yes No
To Next Page
Loading...
Need help?
General
