Operation
38 / 56
3-140-UM-EN-02
6.2 Switching on the meter
u Check the electrical connections.
u Turn on the power supply.
u If required, fix alarm.
u Check the pulse value (Imp) of the flow meter.
u Check the installation side (Sid) of the flow me-
ter.
u Fit and close the cover(1).
u Tighten two screws(2).
u Attach the safety caps(3) to each screw with
the smooth side facing outwards.
u Check the unit of the main input (set the auxil-
iary meter).
u Check the pulse value of the main input (set the
auxiliary meter).
u Check date and time.
u Check that the flow indicator blinks if there is a
flow.
u Check the current values during operation on
their plausibility.
u Check the reset time of the display.
u Set the filter settings for current values of Q and
P.
To Next Page
Loading...
Need help?
General
