Attention: There are several reasons why your board may fail to get and IP
address in this step:
• Your port is not active or the cable is not plugged in.
• You do not have a DHCP server.
• Your DHCP server ran out of addresses.
• Your DHCP server was not allowed to respond to the board due to
security filters, such as MAC address filtering.
7. Launch a web browser on a PC that is connected to the same network, and enter
the IP address from the LCD into the browser address bar. The Board Update
Portal web page appears in the browser.
Attention: You can click Cyclone V SoC Development Kit on the Board Update
Portal web page to access the kit's home page for documentation
updates and additional new designs.
You can also navigate directly to the Cyclone V SoC Development Kit webpage of
the Intel website to determine if you have the latest kit software.
4. Board Update Portal
830285 | 2024.10.07
Send Feedback
Cyclone
®
V SoC Development Kit User Guide
25
To Next Page
Loading...
