Intel altera Cyclone V SoC - Page 40

• Temp on 2978: The temperature controls display only the temperature from the
power supply manager, not the FPGA.
• Total Power: These controls display the sum of all four rails for each group, U34
and for U26.
Controls
This group contains the following controls:
• Start: Starts the communication with the board to monitor power.
• Stop: Stops the communication with the board to monitor power.
• Update speed: Specifies how often to refresh the graph.
• Log Results: Specifies that a log file is saved to
cycloneVSX_5csxfc6df31_soc\examples\board_test_system.
• MAX V version—Indicates the version of MAX V code currently running on the
board. The MAX V code resides in the following directories:
—
cycloneVSX_5csxfc6df31_soc\factory_recovery
—
cycloneVSX_5csxfc6df31_soc\examples\max5
A table with the power rail information is available in the Cyclone V SoC Development
Board Reference Manual.
Related Information
Cyclone V SoC Development Board Reference Manual
5. Board Test System
830285 | 2024.10.07
Cyclone
®
V SoC Development Kit User Guide
Send Feedback
40