Intel II User Manual

Chapter 2 – SettingUptheGatewayonaNetwork
19
10 On the Wireless Settings screen, create a Network
Name (SSID) to be used by all of your wireless
devices, and then click Save/Next.
For security purposes, we strongly recommend you
change the Network Name from the default name.
Use any letters or numbers up to 32 characters (case
sensitive).
11 On the Encryption Settings screen, type encryption
settings to be used by all of your wireless devices
(recommended for security purposes), and click
Save/Next.
12 On the Device Settings screen, click Access Point
Mode.
user_guide_rg1210.book Page 19 Monday, April 22, 2002 2:20 PM

Intel II Specifications

General

Brand	Intel
Model	II
Category	Gateway
Language	English