Chapter 5 – Troubleshooting
67
Windows 2000
1 Click Start > Control Panel > Network and Dial-Up
Connections.
2 Right-click the dial-up, VPN, or incoming connection
you have shared, and then click Properties.
3 On the Sharing tab, remove the Enable Internet
connection sharing for this connection check box,
and click OK.
Windows XP
1 Click Start > Control Panel > Network
Connections.
2 Click the connection you have shared, and then
under Network Tasks,clickChange settings of
this connection.
3 On the Advanced tab, remove the Allow other
network users to connect through this
computer’s Internet connection check box, and
click OK.
Problem My Internet game, which is Universal Plug and Play
aware, does not work
Solution Make sure Universal Plug and Play is enabled on the
gateway. See Universal Plug and Play on page 53.
You also may need to enable UPnP on your Windows
system. See the following problem and solution.
Note Windows XP and Me editions support UPnP.
Other versions of Windows will require a third-party
product to use UPnP.
user_guide_rg1210.book Page 67 Monday, April 22, 2002 2:20 PM
To Next Page
Loading...
Need help?
General
