Chapter 5 – Troubleshooting
68
Problem I’m trying to use UPnP. How do I enable it?
Solution Instructions for installing UPnP on Windows XP and
Windows ME follows. Other versions of Windows will
require a third-party product to use UPnP.
Windows ME
1 Click Start > Settings > Control Panel > Add/
Remove Programs.
2 Click the Windows Setup tab.
3 In the Components list, select the Communications
check box, and then click Details.
4 Make sure the Universal Plug and Play check box is
selected and then click OK.
5 Click Apply to save your changes.
Windows installs the components. You are prompted
to restart your PC.
6 Click Yes to restart.
Windows XP
1 Click Start > Control Panel > Add or Remove
Programs, and then in the left channel, click Add/
Remove Windows Components.
2 In the Components list, select the Networking
Services check box, and then click Details.
3 Select Universal Plug and Play, and then click OK.
4 Click Next and then Finish.
Problem My Internet game does not work
Solution You may need to enable a custom rule on the gateway.
See To create a custom rule on page 49. Also, see I’m
having trouble connecting to my Internet game server on
page 63.
user_guide_rg1210.book Page 68 Monday, April 22, 2002 2:20 PM
To Next Page
Loading...
