Intel SE7500CW2 - Figure 10. Output Voltage Timing; Table 66. Voltage Timing Parameters

General Specifications SE7500CW2 Server Board Technical Product Specification
100
Revision 1.40
Figure 10. Output Voltage Timing
The following tables show the timing requirements for a single power supply being turned on and
off via the AC input, with PSON held low and the PSON signal, with the AC input applied. The
ACOK# signal is not being used to enable the turn on timing of the power supply.
Table 66. Voltage Timing Parameters
Item Description Min Max Units
T
vout_rise
Output voltage rise time from each main output. 5 70 msec
T
vout_on
All main outputs must be within regulation of each other within this time. 50 msec
T
vout_off
All main outputs must leave regulation within this time. 400 msec
Vout
10%
Vout
T
vout_rise
T
vout_on
T
vout_off
V1
V2
V3