System BIOS SE7500CW2 Server Board Technical Product Specification
62
Revision 1.40
Feature Choices Description
Console Connection Direct
(default)
Via
modem
Indicates whether the console is connected directly to the
system or whether a modem is used.
Continue C.R. after
POST
Off
(default)
On
Enables console redirection (C.R.) after the operating
system has been loaded.
6.5.6.6 Event Logging Submenu
To access this submenu, select Advanced on the menu bar at the top of the screen and then
Event Logging.
Main Advanced Security Power Boot System Exit
I/O Device Configuration
On Board Device
PCI Configuration
Server Menu
Console Redirection
Event Logging
Hardware Monitor
Table 27 lists the options available through the Event Logging submenu. This submenu allows
you to view the event logs.
Table 27: Event Logging Submenu
Feature Choices Description
Event log validity No options Indicates if the contents of the event log are valid.
Event log capacity No options Indicates if there is space available in the event log.
View event log <Enter> Select <Enter> to display the current event log. Only
SBE and MBE events are supported. No Windbond
83627HF Super-I/0 information is available.
Event Logging Disabled
Enabled
(default)
Enables logging of events.
ECC Event Logging Disabled
Enabled
(default)
Enables logging of ECC events.
Clear all event logs No (default)
Yes
Clears the event log after booting.
Must be set to Yes if the Event Log Validity option is
invalid.
To Next Page
Loading...
