Intel SE7500CW2 - Advanced Menu; Table 19: Advanced Menu

SE7500CW2 Server Board Technical Product Specification System BIOS
55
Revision 1.40
6.5.6 Advanced Menu
To access this menu, select Advanced on the menu bar at the top of the screen.
Main Advanced Security Power Boot System Exit
I/O Device Configuration
On Board Device
PCI Configuration
Server Menu
Console Redirection
Event Logging
Hardware Monitor
Table 20 list the selections available on the Advanced menu. This menu configures advanced
features available through the chipset.
Table 20: Advanced Menu
Feature Choices Description
I/O Device Configuration Select to display
submenu
Configures the I/O ports.
On Board Device Select to display
submenu
Configures the onboard RAID, network, and USB
controllers.
PCI Configuration Select to display
submenu
Configures the onboard PCI or RAID devices.
Server Menu Select to display
submenu
Sets options for server features.
Console Redirection Select to display
submenu
Provides additional options to configure the
console
Event Logging Select to display
submenu
Displays the event logs.
Hardware Monitor Select to display
submenu
Displays voltages, temperatures, and fan speeds
for the system.
Installed O/S Win2000/.NET
(default)
NT4
Other
Specifies the operating system installed on your
system that you will use most often. An incorrect
setting can cause some operating systems to
behave erratically.
Note: If you select NT4, an additional submenu
item, NT4 Installation Workaround, will appear. It
is disabled by default. To install Windows NT 4.0,
you need to change the NT4 Installation
Workaround option to Enabled. Disable it to install
pertinent service packs.
Boot-time Diagnostic
Screen
Enabled
Disabled (default)
Enables or disables the boot-time diagnostic
screen.
Disabled will display the splash screen over the
diagnostic screen. This splash screen can be
changed to show and OEM based logo.