Intel SE7500CW2 - Page 82

System BIOS SE7500CW2 Server Board Technical Product Specification
70
Revision 1.40
6.6.2.1 Supervisor/User Passwords and F2 Setup Usage Model
Note:
1. Visible = option string is active and changeable
2. Shaded = option string is grayed-out and view-only
6.6.2.1.1 Three Scenarios
Scenario# 1
Supervisor Password Not Installed
User Password Not Installed
Login Type: N/A
Set User Password (shaded)
Set Supervisor Password (visible)
Password on boot (Shaded)
Diskette Access (Shaded)
Note: User Access Level option will be Full and Shaded as long as the supervisor password is
not installed.
Scenario# 2
Supervisor Password Installed
User Password Installed
Login Type: Admin/Supervisor
Set User Password (visible)
Set Supervisor Password (Visible)
Password on boot (visible)
Diskette Access (visible)
Login Type: User
Set User Password (visible)
Set Supervisor Password (shaded)
Password on boot (shaded)
Diskette Access (shaded)
Scenario# 3
Supervisor Password Installed
User Password Not Installed
Login Type: Supervisor
Set User Password (visible)
Set Supervisor Password (Visible)
User Access Level [Full] (visible)
Password on boot (shaded)
Diskette Access (shaded)