Intel WAPD-235N User Manual

Access Point Management (Admin Guide)
Content Access Point
November 2016 User Manual
51
6.7 LAN settings
Set the IP address (LAN side) and DHCP server configuration of the Content Access Point. (See Figure 54.)
6.7.1 IP address
Enter the desired IP Address. The default IP address is 192.168.88.1.
Enter the desired Netmask. The default netmask is 255.255.255.0.
Click Save.
6.7.2 DHCP Server
To enable the DHCP server, set the DHCP Mode to DHCP Server.
Enter the IP address range with Start IP and End IP.
Enter the Lease Time of an IP address.
Enter the primary DNS server IP address in the DNS Server1 field and an alternate in the DNS Server2
field.
Enter the Domain Name.
Enter the Default Gateway.
Click Save.
Figure 54: Admin - LAN settings

Intel WAPD-235N Specifications

General

Brand	Intel
Model	WAPD-235N
Category	Wireless Access Point
Language	English