Intellian v240M - Page 34

v240M – Marine Satellite Communication System
34
Assembling the EL Arms and EL Arm Support Frame
Figure 25. Assemble EL Arm Plates
Figure 26. Assemble EL Arm Support Frame
Assemble EL Arm Plates:
• Bolts: Assemble six M8 x 20L Bolts per a Plate.
• Plates: One upper and one lower plates per EL Arm. Four
plates total.
M8 x 20L Hex Wrench Bolt,
M8 Spring Washer, M8 Flat
Washer.
1
2
After assembling the EL Arm Plates to the EL Arms on both sides, attach the EL Arm
Support Frame as shown in gure 26. The EL Arm Support Frame should be xed to both
ends of EL Arms in the holes left empty from gure 24.