v240M – Marine Satellite Communication System
98
Heading
Latitude & longitude
Save
4
LATITUDE LONGITUDE
37.00N 126.50E
5. Set the current LATITUDE and LONGITUDE
Press the LEFT and RIGHT arrow keys until the desired character is underscored (selected).
Press the UP and DOWN arrow keys to increase or decrease the value. Or press the NUMBER
keys to set the desired value directly. Press the the OK key to set the parameter.
HEADING
000.0
6. Entry of the ship’s heading is not required when your system is connected to a NMEA(0183)
or NMEA2000 Heading Gyrocompass output. Ensure that the supported gyrocompass type
is set correctly. For the v240M , if the ship’s gyrocompass output is Step-by-Step (SBS) or
Synchro, separate purchase of a gyrocompass converter is required.
SAVE ?
4
YES NO
7. Press the LEFT arrow key to move the cursor to YES and press the OK key to save the
current settings. Or move the cursor to NO and press the OK key to abort and return to the
main display.
To Next Page
Loading...
Need help?
General
