IntelliSAW CAM-5 User Manual

User Manual
910.00382.0001 May 2018
22
Section 3 Wiring
WARNING
SYSTEM WIRING SHOULD BE PERFORMED ONLY BY PERSONNEL WHO ARE TECHNICALLY
COMPETENT AND AUTHORIZED TO DO SO. LOCAL REGULATIONS REGARDING ELECTRICAL
INSTALLATION AND SAFETY MUST BE OBSERVED.
Failure to follow the instructions given can result in death or serious injury
WARNING
TO AVOID ELECTRICAL SHOCK. AC POWER WIRING MUST NOT BE CONNECTED TO THE
SOURCE UNTIL ALL WIRING CONNECTIONS PROCEDURES ARE COMPLETED.
Failure to follow the instructions given can result in death or serious injury
WARNING
CHECK THE INFORMATION LABEL ON THE CASE TO DETERMINE THE CORRECT VOLTAGE
BEFORE CONNECTING TO A LIVE SUPPLY.
Failure to follow the instructions given can result in death or serious injury
WARNING
SYSTEM EVALUATION AS A RECOGNIZED COMPONENT DOES NOT CONVEY RECOGNITION
TO THE END EQUIPMENT INTO WHICH THE SYSTEM IS INSTALLED.
PROFESSIONAL INSTALLER OR OEM IS RESPONSIBLE FOR ALL CODE AND SAFETY
REQUIREMENTS ASSOCIATED WITH SENSOR AND ANTENNA PLACEMENT AND CABLE OR
WIRE CONNECTIONS.
Failure to follow the instructions given can result in death or serious injury

IntelliSAW CAM-5 Specifications

General

Brand	IntelliSAW
Model	CAM-5
Category	Measuring Instruments
Language	English