IntelliSAW CAM-5 User Manual

User Manual
May 2018 910.00382.0001
51
Section 6 Measurement Configuration &
Sensor Installation
6.1 Measurement Configuration
If the CAM-5 has internal measurements (temp, PD, humidity), it will require measurement configuration
for the associated installed sensors. Configuration is performed through the USB mini port and uses the
IntelliSAW Configuration Tool. Details are not discussed here, please refer to the (910.00160.0001)
IntelliSAW Installation Tool User Manual for detailed instructions.
Figure 31: IntelliSAW Configuration Tool

IntelliSAW CAM-5 Specifications

General

Brand	IntelliSAW
Model	CAM-5
Category	Measuring Instruments
Language	English