Interacoustics Eclipse - 8.9.5 No response; 8.9.6 Selected correction factor; 8.9.7 PC shortcuts

D-0120578-C – 2019/11
Eclipse – Instructions for Use - US
Page 117
8.9.5 No response
When no response is detected, a no response symbol is displayed in the estimated audiogram.
No response symbols are displayed both in Noah & OtoAccess/Journal
TM
.
8.9.6 Selected correction factor
From the dropdown list, select the appropriate Correction Factor to apply to the recording.
8.9.7 PC shortcuts
Shortcut
Description
F1
Operation Manual
F2
Start / Stop test
F4
Pause / Resume test
F7
Report
F8
Print session
Ctrl + F7
Temporary Setup
Ctrl + P
Print session
Alt + X
Save & Exit
Page down
Toggle backwards through historic sessions
Page up
Toggle forwards through historic sessions
Home
Return to Current session
End
Jump to Oldest historic session