Interacoustics Eclipse - 3.11.3 Example of AMLR recording

D-0120578-C – 2019/11
Eclipse – Instructions for Use - US
Page 54
3.11.3 Example of AMLR recording
An AMLR threshold recording here using Tone Burst 1 kHz for threshold evaluation.
Cochlear implants
The longer latencies of the AMLR separate them from the cochlear implant stimuli artifacts seen under the
traditionally eABR.
AMLR may this way be used to assess the efficacy of cochlear implant in activating the auditory pathway
Please refer to the AMLR Threshold functions described under Record and Edit tabs later in this instruction
for use manual.
Further information about AMLR recordings can be obtained from Eclipse Additional Information Manual.