D-0116684-B – 2020/03
OtoRead™ - Instructions for Use - US Page 50
Use the CHANGE keys to select an option and the NEXT key to
proceed to the next test paramater.
Once the ’Number of Frequencies for PASS’ is set above zero, green
bars are displayed to identify this setting, the green colour indicating
that the frequency band in question has passed the selected pass
criteria.
3.18.10.7 Reset protocol
Press the RESET keys to return the selected protocol paramaters
to their original factory settings. Press the NEXT key to return to
the Main menu..
This does not affect the instrument settings or the settings of any
other protocol.
3.18.10.8
Save protocol
Once all of the parameters have been set for the protocol, these
settings can be saved by pressing on one of the SAVE keys.
To exit without saving protocol setting changes press the DONE
key to return to the Main menu.
When one of the SAVE keys have been pressed, CUSTOM
PROTOCOL SAVED will be displayed as confirmation. Press the
DONE key to return to the Main menu.
To Next Page
Loading...
