Interface GOLD STANDARD - Introduction

7418 East Helm Drive • Scosdale, Arizona 85260 • 480.948.5555 • www.interfaceforce.com
Page 10 of 45

The Interface Gold Standard Force Calibraon System provides an integrated force
calibraon soluon, making possible high accuracy calibraons. The system consists of a
hydraulic load frame, feedback control system, high accuracy load cell measurement and
soware tuned to automacally operate the load frame. When used in conjuncon with
the Interface 1600 or 1800 Series load cell standards, the system provides the user with an
accurate tool for easy and quick calibraon of load cells in tension or compression.
The system is the result of over two decades of experience to develop the hardware and
soware for high precision force calibraon. The load cell measurement includes signal
condioning circuitry for the transducer bridge, analog-to-digital converter, and logic
circuitry to interface with the PC. With an extremely high sensivity of 0.1 microvolt per
increment, extra low noise, and superior stability, the circuitry provides state-of-the-art
measurement of strain gage transducer signals.