31
Memory
Bank 0
DIMMs
Bank 1
DIMMs
Bank 2
DIMMs
Bank 3
DIMMs
32 MB 32 MB
64 MB 64 MB
96 MB 64 MB 32 MB
128 MB 128 MB
256 MB 128 MB 128 MB
384 MB 128 MB 128 MB 128 MB
512 MB 128 MB 128 MB 128 MB 128 MB
1 GB 256 MB 256 MB 256 MB 256 MB
The system board features four DIMM sockets, which combined can hold up to 1 GB of
Synchronous Dynamic Random-Access Memory (SDRAM). See the system board diagram
in Chapter 5, “System Board,” for socket locations.
See Chapter 2, “Servicing the System,” to install a memory upgrade.
Adding a Processor
You can upgrade a single processor system to a dual processor system.
Processors are mounted in a processor retention module which surrounds the processor slots.
See the system board diagram in Chapter 5, “System Board,” for the location of processor
slots and related connectors.
Single-to-Dual Upgrade
You can upgrade to dual processors in the following ways:
u
You can purchase a single-to-dual processor upgrade kit from Intergraph Computer
Systems. The kit contains all the hardware, software, and documentation required to
perform the upgrade.
u
You can purchase a second processor from another vendor.
After completing the hardware upgrade, you must also upgrade to a multi-processor version
of Windows NT. You can upgrade the operating system in the following ways:
u
You can purchase the Intergraph upgrade kit mentioned previously. The kit contains all
the hardware, software, and documentation required to perform the upgrade.
To Next Page
Loading...
