Interlogix ZeroWire - Page 59

68 ZeroWire User Manual
Schedule
A schedule is a list of up to 16 sets of days and times. Typically these are used to
provide access to users only within the specified sets of days and times. Outside of
the schedule a user will not have access to the system.
Schedules are used to automatically arm and disarm specified partitions using the
Arm-Disarm feature.
Scenes can perform a set of actions according to a specified schedule.
Schedules themselves can be enabled and disabled through actions. This powerful
feature allows you to provide conditional access to various users and devices based
on system conditions.
Sealed
A zone in a normal state is “sealed”. The security system monitors each zone for
changes in state from sealed to unsealed and can respond with certain actions such
as sounding the siren.
For example, a reed switch on a front door may change from a sealed state to an
unsealed state when the door opens.
Service Provider The installation / maintenance company servicing your security system.
Stay Mode
To turn your security system on when you are staying in the premises, this will
automatically bypass pre-programmed zones and arm others. Often used to arm
only the perimeter while allowing movement inside the premises.
Tamper
A physical switch on a device that detects unauthorised access to the unit. For
example opening the case of a zone or taking a keypad off the wall can trigger a
tamper alarm. This can provide early warning of someone attempting to undermine
the security of your system. Some devices use an optical zone to detect removal
from a surface.
Token
Each token is a pre-recorded word or phrase that can be used to name zones,
partitions, outputs, and rooms.
Each token is identified by a token number and a full list of tokens is in the "Voice
Library" on page 65.
UltraConnect app
Mobile app for smartphones to access your ZeroWire. View status, control zones
and outputs, control Z-Wave devices, view cameras, program users and other
ZeroWire features. Available to download for Apple
TM
iPhone
TM
and Google
TM
Android
TM
from the respective app store.
The UltraConnect app connects to the UltraConnect cloud servers which then
connects you securely to your ZeroWire system and cameras.
UltraConnect
Servers
A secure cloud service with full redundancy to route encrypted alarm messages
from your ZeroWire to a Central Monitoring Station. It also provides secure
connections between the UltraConnect app, ZeroWire, and cameras. No
programming, email addresses, user names, or PIN codes are stored on these
servers for greater security.
Unsealed
A zone in an abnormal state is “unsealed”. The security system monitors each zone
for changes in state from sealed to unsealed and can respond with certain actions
such as sounding the siren.
For example, when a PIR zone detects movement it will change from a sealed state
to an unsealed state.