Chapter 9 — Options
92 EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
The LTS can be enabled or disabled by means of the instructions
LTS&ON and LTS&OFF respectively in Intermec Fingerprint
and the Intermec Direct Protocol.
Real Time Clock
The Real Time Clock circuit (RTC) relieves the operator or the
host from having to set the clock/calendar using the Intermec
Fingerprint instructions DATE$ and TIME$ after each power
up. The RTC has its own backup battery backup that will last 10
years or more.
CompactFlash Protection Plate
The protection plate encloses an inserted CompactFlash card and
makes it more difficult to steal. See “Memory Card” on page 20
for illustration.
Interface Boards
A number of interface boards are available for use with the
EasyCoder PF2i printer. The interface boards are either factory-
fitted or can easily be fitted by an authorized service technician.
The EasyCoder PF2i printer can accommodate one EasyLAN
interface board plus one other interface board.
EasyLAN boards:
• EasyLAN Ethernet interface
• EasyLAN Wireless interface
Other communication boards:
• Parallel Interface Board (IEEE 1284)
• Double Serial Interface Board
• Serial/Industrial Interface Board
To Next Page
Loading...
Need help?
General
