Chapter 2 — Installation
EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version) 15
Status (flashing green) indicates that the printer is
communicating.
Status (solid red) indicates an error condition (see “Intermec
Ready-To-Work Indicator” on page 94).
Intermec Ready-To-Work Indicator (blue; on, blink, or off).
Represented by a blue light on Intermec handheld computers,
access points, and printers, the Intermec Ready-To-Work
Indicator is part of an exclusive monitoring system from
Intermec. The Intermec Ready-To-Work Indicator helps users
quickly determine the readiness of the Intermec device
individually and as part of a solution. The Intermec Ready-To-
Work Indicator has three different states: On, Blinking, and Off.
When the Indicator is off, the device is not ready to operate
individually or as part of a solution. When the Indicator is
blinking, the device may be initializing, waiting for external
resources, or in need of user attention. And when the Indicator is
On, the device is ready for use as part of a solution. Also see
“Troubleshooting” on page 93.
Display
The display window contains an LCD (Liquid Crystal Display)
with background illumination and two lines of text, each with 16
characters. It guides the operator through the setup and indicates
possible errors during printing. The Intermec Fingerprint
programming language and the Intermec Direct Protocol allow
custom-made messages to be composed and displayed according
to the requirements of the application.
Keyboard
The keyboard is of the membrane-switch type and has 22 keys.
The keyboard is supplemented by a large Print button on the
printer’s front. Some keys have hard-coded functions in the
startup and setup modes:
To Next Page
Loading...
Need help?
General
