Intermec EasyCoder PF2i User Manual

Chapter 7 — Setup Mode
EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version) 69
Navigating in Setup Mode
While going through the setup procedure, you are guided by
texts in the printer’s display. You can navigate between setup
menus, acknowledge displayed values, select or enter new values,
etc. by using the keys on the printer’s keyboard.
Note: An external keyboard cannot be used in the Setup Mode.
Keyboard Buttons for Setup Mode
Button Function
Move one menu to the left on the same level or
scroll back in a stack of options.
Move up one level.
Move one menu to the right on the same level or
scroll forward in a stack of options.
Move down one level.
Display error messages at test label printing
failure.
Enter numeric values.
Specify negative values (leading position).
Clear displayed values.
Acknowledge and move to next menu or perform
test feeds in the Testfeed menu, or print test
labels in the Test label menu.
Exit the Setup Mode. Can be used anywhere in
Setup Mode.
-

Intermec EasyCoder PF2i Specifications

General

Brand	Intermec
Model	EasyCoder PF2i
Category	Printer Accessories
Language	English