Chapter 2 — Installing the Printer
PF8d/PF8t Printers User’s Guide 13
3 Download LabelShop from the Intermec web site or insert
the PrinterCompanion CD. If you download LabelShop, you
will need to unzip the files.
4 Follow the installation prompts to install LabelShop in the
default directory.
5 Download Service Pack 5 for LabelShop from the Intermec
web site and unzip the files.
6 Follow the installation prompts to install Service Pack 5 in the
same directory where LabelShop is installed.
Downloading and Installing LabelShop (USB connection)
1 Use the Windows Control Panel Add/Remove Programs
feature to uninstall all previous versions of LabelShop and
service packs for LabelShop from the computer.
2 Connect the printer to the computer using a USB
connection.
3 Install Windows Interdrivers version 7.1.4 or later. These
drivers are available on the PrinterCompanion CD or they
can be downloaded from the Intermec web site.
4 Download LabelShop from the Intermec web site or insert
the PrinterCompanion CD. If you download LabelShop, you
will need to unzip the files.
5 Follow the installation prompts to install LabelShop in the
default directory.
6 Download Service Pack 5 for LabelShop from the Intermec
web site and unzip the files.
7 Follow the installation prompts to install Service Pack 5 in the
same directory where LabelShop is installed.
Loading Media
Both models of the PF8 printers can print on direct thermal
media. The PF8t can also print on thermal transfer media such as
self-adhesive labels, non-adhesive tags, or continuous stock.
Printing on thermal transfer media also requires a thermal
transfer ribbon.
To Next Page
Loading...
Need help?
General