Appendix A — Specifications
32 PF8d/PF8t Printers User’s Guide
PF8d Specifications
General Specifications
Resolution 8 dot/mm (203 dpi)
Print Mode Direct Thermal
CPU 32 bit
Memory 4 MB flash, 8 MB SDRAM
Print Speed 2, 3, and 4 ips
Print Length Maximum 1727 mm (68 in)
Minimum 12.0 mm (0.47 in)
Print Width Maximum 104 mm (4.09 in)
Sensor Type Adjustable reflective sensor. Fixed transmissive
sensor is center-aligned.
Sensor Detection Label gap and black mark sensing, Label length
autosensing and/or program command setting.
Media Label roll outside diameter: Maximum 127 mm (5
in)
Core diameter: 25 mm, 38 mm (1 in, 1.5 in)
Width: 25 mm to 118 mm (1 in to 4.65 in)
Thickness: 0.05 to 0.18 mm (.002 to .007 in)
Firmware ESim (v7.x or later)
Software ActiveX Controls (v1.3 or later)
InterDriver (v7.06 or later)
ESim Config Tool (v2.1 or later)
LabelShop Patch (v6.12 or later))
Resident Fonts 6, 7, 10, 12, 24 points
Fonts Download Windows bitmap font: Can be rotated in 8
orientations and expandable 8 times horizontally
and vertically
TrueType Font: v2.xx can be rotated in 4
orientations
Image Handling BMP, PCX, Support ICO, WMF, JPG, EMF files
through software.
Bar Codes Code 39, Code 93, Code 128 (subset A, B, C),
UCC/EAN-128, UPC A / E (add on 2 & 5), I 2 of
5, I 2 of 5 with check digit, I 2 of 5 with human
readable check digit, EAN 8 / 13 (add on 2 & 5),
Codabar, Post NET, MaxiCode, PDF417,
Datamatrix code, QR code, UPC SCC,
EAN?UCC composite code
To Next Page
Need help?
General