Chapter B — Media Specifications
PF8d/PF8t Printer User’s Guide 47
Plain Continuous Stock
The PF8 printers can use continuous stock without any detection
slots or black marks. The printer must be set for continuous stock
by using the ESim Q command. For more information, see the
ESim for the PC4 and PF8 Printer Programmer’s Reference Manual
(P/N 937-011-xxx).
The length of each copy is decided by the size of the print image
and any additional media feed is decided by the Q command.
Continuous stock cannot be used in the Auto-Sensing mode.
Tag or strip width (a)
Maximum: 116.0 mm (4.57 in)
Minimum: 25.0 mm (1.00 in)
a
CONTINUOUS STRIP
To Next Page
Loading...
Need help?
General